Cleaning and drying
Silo
Type: S
With a WiPa dosing container, a wide variety of materials such as film chips, fibers, foams, etc. are reliably fed to the downstream processes with only a low energy input. The success of the WiPa dosing containers are the innovative conveyor rails, which, when the conveyor rails move forward, allow the slides to fold out, thus powerfully conveying the material in the discharge direction.
Silo
The procedure
If the conveying elements move to the rear, the conveying elements will contact each other and slide backward through the material with only slight resistance. Very little material is withdrawn and compared to conventional systems, the WiPa system consumes up to 75% less energy. While conveyor rails 1 and 3 move forward, rails 2 and 4 move in the opposite direction. This is done in continuous alternation. Due to the modular design of the containers, sizes from 6 to 1000m3 can be produced based on the same or similar parts. The silos can also be upgraded later with little effort.
See for yourself:
These are the advantages of this machine
- Electric control of the hydr. components, the discharge screw and the opening roller are installed directly on the Silo.
- Discharge rate in the standard version approx. 10m3/hour, which can be extended up to approx. 100m3/hour
- No bridging
- Silo can be enlarged practically endlessly
- Approx. 75% energy saving compared to conventional systems
Type S 50
All data at a glance
Technical data | S 7 | S 10 | S 16 | S 20 | S 50 | S 50 | S 75 | S 100 | S 120 | S 150 | S 200 |
Volume m³ | 7,1 | 10,6 | 15,9 | 21,2 | 28,2 | 51 | 73,7 | 96,4 | 120,5 | 147,4 | 192,8 |
Width m | 1,4 | 1,4 | 2,1 | 2,1 | 2,8 | 2,8 | 2,8 | 2,8 | 3,5 | 2,8 | 2,8 |
Length m | 3,6 | 3,6 | 3,6 | 3,6 | 3,6 | 6,5 | 9,4 | 12,3 | 12,3 | 9,4 | 12,3 |
Height m | 1,4 | 2,1 | 2,1 | 2,8 | 2,8 | 2,8 | 2,8 | 2,8 | 2,8 | 5,6 | 5,6 |
Throughput rates and technical data are empirical values and may vary depending on the material.
